Industrial Pipe Bending Process

Water pipe bending machines can flex any type of steel pipes in spite of the material or size and these machines range from handheld machines, hinged devices as well as large sized hydraulic powered machines. You will find different processes used to fold metals. Given below are a few of them. KP-LOK tubing bender

Press:

Press twisting is employed on cold pipes and here a cease to live that is in the condition of the fold is employed to press on the pipe which in turn forces the water line to be shaped as the curve. However in this process, the pipe will not have any support inside and due to this there are likelihood of the metal getting deformed. So press process is ideal when uniform cross section in the pipe is not required. 

Rotary get process

Rotary draw is a procedure that offers you precise finish and this process uses cease to live sets which has two parts namely the previous die as well as the counter die. The condition is created by the former die and countertop die pushes the cloth into the former pass away. These benders can be programmed to store various bend jobs and this process is employed to flex pipes for automobile move cages, handles, handrails and more. They also create perfect bends when the right die sets are being used to produce bends.

Three move drive

Three roll force processes is a freeform being process and it can be used to create geometries that include several twisting curves as well as 3d shaping. Here the metal bend profile is guided between two comes, the bending as well as the supporting rotate. The forming roll is the third roll and this helps define the radius of the fold.

Heat induction process:

Found in hot weather induction process an induction coil is employed to bend the water pipe and this coil is put at the fold point. The coil warms up to temperatures of 430 to 1200 deg centigrade. Once the water line is heated, pressure is applied to the water pipe and this pressure bends the pipe. The tube is then cooled down by using a water or air spray. This process is sued to bend large pipes that are being used as petroleum pipe lines, highway signs as well as power plants.

Leave a Reply

Your email address will not be published. Required fields are marked *